Si-H00C0P1

Si-H00C0P1

Description

  • Opis SiOne

    SiOne can be humidity, temperature, barometric pressure, differentia pressure, carbon dioxide (CO2), volatile organic compounds (VOC), particulate matter (PM) and/or Analog signal transmitters (it depends on model). The SiOne line combined with an internal and/or external sensors provide state-of-the-art functionality. Various models are available including wall, duct or remote sensors. SiOne is introducing powerful programming capabilities. Settings of the device can be modified through USB programming unit, PC software or Modbus interface. Modbus RTU baud rate, Modbus RTU address and type of Analog outputs can be fast changed by configuration jumpers.

    Schemat połączenia SiOne

     

    ( 1 ) – RS-485 interface (Modbus RTU) or Industrial Ethernet (Modbus TCP)
    ( 2 ) – programmable relay output On/Off (option)
    ( 3 ) – programmable (up to 3) Analog outputs: 0…5 V, 0…10 V, 0…20 mA or 4…20 mA (option)

     

    SiOne transmitters offers Fieldbus (RS-485 – Modbus RTU) or Industrial Ethernet (Modbus TCP) interfaces. The SiOne line can provide up to three fully programmable and scalable Analog outputs (types of output: 0…5 V, 0…10 V, 0…20 mA or 4…20 mA). Analog output can be modified by configurations jumpers, Modbus interface or USB programming unit. SiOne transmitter with relay output can be used as simple binary sensor (pressostat, hygrostat, thermostat, CO2-stat, …). Threshold and hysteresis of output can be also modified by Modbus or programming unit.

  • Si-xxxC0xx

    Technical drawing


    All dimensions on this drawing are reference only.

Additional information

KOD PRODUKTU

Si-H00C0P1

TYP URZĄDZENIA

TRANSMITTER

MIERZONE PARAMETRY

HUMIDITY, TEMPERATURE

ZAKRES POMIAROWY

 -100…+200 °C (WITH SENS-H-… PROBE),  -50…+100 °C (WITH SENS-H-… PROBE),  0…100 %RH (WITH SENS-H-… PROBE)

DOKŁADNOŚĆ (MAX.)

 ±0.1 °C (WITH SENS-H-… PROBE),  ±0.8 %RH (WITH SENS-H-… PROBE)

DODATKOWE OPCJE

PSYCHOMETRIC CALCULATIONS

TYP SENSORA

INTERCHANGEABLE PROBE

FILTR SENSORA

PROBE DEPENDENT

ZASILANIE

11.5…32 VDC / 24 VAC ± 5% (OPTION…-HV), 11.5…27 VDC

INTERFEJS

RS-485 (MODBUS RTU)

WYJŚCIA ANALOGOWE

WYJŚCIA ANALOGOWE – TYP

WYJŚCIA ANALOGOWE – ROZDZIELCZOŚĆ

WYJŚCIA PRZEKAŹNIKOWE

1x

WYJŚCIA PRZEKAŹNIKOWE – PARAMETRY

MAX. 1 A / 30 VDC, 0.3 A / 125 VAC, PROGRAMMABLE

PRZYŁĄCZE ELEKTRYCZNE

SCREW CONNECTOR – MAX. SECTION OF WIRE: 16…28 AWG (1,31…0,081 MM2)

DIODY SERWISOWE

2x LED

WYŚWIETLACZ

PAMIĘĆ – REJESTROWANE DANE

PAMIĘĆ – TYP

PAMIĘĆ – POJEMNOŚĆ

PAMIĘĆ – CZĘSTOTLIWOŚĆ ZAPISU

PARAMETRYZACJA

DIP-SWITCHES, MODBUS, PC CONFIGURATION SOFTWARE

STOPIEŃ OCHRONY

IP65

TEMPERATURA PRACY

-30…+60 °C

WILGOTNOŚĆ PRACY

0…95 %RH (WITHOUT CONDENSATION)

TYP OBUDOWY

WALL

MATERIAŁ OBUDOWY

POLYCARBONATE

WYMIARY OBUDOWY

SEE: DRAWING

W KOMPLECIE

MANUAL

CZĘSTOTLIWOŚĆ POMIARU

1 Hz, 1 Hz (humidity)