Mi-H00C2A3

    • Powerful Microprocessor
    • Functionally Programmable
    • Fast Configurations on Site
    • Modbus Interface
    • Programmable Relay Outputs
    • LCD with Backlight
    • Additional options available

    MiOne is humidity and temperature, only temperature or Analog signals transmitters (it depends on model). The MiOne line combined with an internal and/or external sensors provide state-of-the-art functionality. LCD display, with backlight function, shows up to two measuring values simultaneously (values and units (optional)). Various models are available including wall, duct or remote sensors. MiOne is introducing powerful programming capabilities. Settings of the device can be modified on site through LCD, three buttons and simple device’s Menu. Changing of parameters is possible also via USB programming unit, PC software or Modbus interface.

    schemat podłączenia MiOne

    ( 1 ) – RS-485 interface (Modbus RTU) or Industrial Ethernet (Modbus TCP)
    ( 2 ) – programmable relay outputs On/Off
    ( 3 ) – programmable (up to 3) Analog outputs: 0…5 V, 0…10 V, 0…20 mA or 4…20 mA (option)

     

    MiOne transmitters offers RS-485 (Modbus RTU) interface. The MiOne line can provide up to three fully programmable and scalable Analog outputs (types of output: 0…5 V, 0…10 V, 0…20 mA or 4…20 mA). Analog output can be modified on site (device’s Menu), Modbus interface or USB programming unit. Each MiOne offers two programmable relay outputs. Threshold and hysteresis of outputs can be also modified on site (device’s Menu) or by  Modbus or USB programming unit. Relay outputs can switch on or switch off external devices like buzzers, signal towers, …

    Technical drawing

    All dimension in mm. This drawing is for informational purposes only. The manufacturer reserves the right to make changes in the product dimensions without prior notice.

Kod produktu

Mi-H00C2A3

Typ urządzenia

Transmitter

Mierzone parametry

Humidity, Temperature

Zakres pomiarowy

 -100…+200 °C (with Sens-H-… probe),  -50…+100 °C (with Sens-H-… probe),  0…100 %RH (with Sens-H-… probe)

Dokładność (maks.)

 ±0.1 °C (with Sens-H-… probe),  ±0.8 %RH (with Sens-H-… probe)

Częstotliwość pomiaru

1 Hz, 1 Hz (humidity)

Dodatkowe opcje

Psychometric calculations

Typ sensora

Interchangeable probe

Filtr sensora

Probe dependent filter

Zasilanie

11.5…27 VDC

Interfejs

RS-485 (Modbus RTU)

Wyjścia analogowe

3x

Wyjścia analogowe - typ

0…10 V, 0…20 mA, 0…5 V, 4…20 mA

Wyjścia analogowe - rozdzielczość

12-bit

Wyjścia binarne

2x

Wyjścia binarne - parametry

Programmable, Relay output – max. 3 A / 30 VDC, 3 A / 250 VAC

Wejścia binarne

Wejścia binarne - parametry

Przyłącze elektryczne

Spring connector – 14…20 AWG (2,08…0,516 mm²)

Diody serwisowe

4x LED

Wyświetlacz

LCD (2 LINES, WITH BACKLIGHT)

Pamięć - rejestrowane dane

Pamięć - typ

Pamięć - pojemność

Pamięć - częstotliwość zapisu

Parametryzacja

Buttons/menu, Configuration software, Modbus

Stopień ochrony

IP65

Temperatura pracy

-10…+60 °C

Wilgotność pracy

0…95 %RH (WITHOUT CONDENSATION)

Typ obudowy

Cable

Materiał obudowy

Polycarbonate

Wymiary obudowy

See: drawing

W komplecie

Gasket for housing, Manual, Screws for housing

Stay up to date
Consultation

Call or write

Contact by phone or email